login
This is the image preview of the following page:
5V @ 2A Step Down Converter using TPS54202
[Customadds id=643821] The circuit shown here is a step down converter which can convert an input voltage varying from 8V to 28V to 5V. The circuit is based on TPS54202, which is a 2A synchronous buck converter. This IC has several features such as over-voltage protection and peak current mode co... Read More
Image Downloads:
- full (1315x484)
- thumbnail (150x150)
- medium (850x313)
- medium_large (640x236)
- large (640x236)
- 1536x1536 (1315x484)
- 2048x2048 (1315x484)
- re_large (783x484)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x236)
- menu-24x24 (24x9)
- menu-36x36 (36x13)
- menu-48x48 (48x18)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x221)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x55)
RELATED POSTS
10 July, 2017 MEMS — A 22-billion-dollar-worth industry by 2018
15 December, 2015 Meet ESP32, New Big Brother to IoT Board ESP8266
4 July, 2016 Basics of the I2C Communication Protocol
12 April, 2018 Simplify your DC/DC #design with @texasinstruments via @oemsecrets
10 June, 2019 Avnet Silica WiFi Shield based on AW-Cu300A module
17 November, 2020 Penguino Feather 4260 SAMR34 based LoRa Dev-Board Features RAK4260 module
