login
This is the image preview of the following page:
6 Channel RF Remote Controller Using CC2500 RF Modules
[Customadds id=643821] The 6 Channel RF Remote Controller designed using CC2500 RF Transceiver modules and PIC16F1847 micro-controller from microchip. Transmitter provided with 6 tact switch, 4 Address Jumpers to pair multiple unit so they don’t interfere with each other. Board provided with po... Read More
Image Downloads:
- full (895x558)
- thumbnail (150x150)
- medium (850x530)
- medium_large (640x399)
- large (640x399)
- 1536x1536 (895x558)
- 2048x2048 (895x558)
- re_large (783x558)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x236)
- menu-24x24 (24x15)
- menu-36x36 (36x22)
- menu-48x48 (48x30)
- sendpress-max (600x374)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x374)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x94)
RELATED POSTS
29 May, 2019 Maximizing power density and thermal performance in power-module designs
29 March, 2017 Easily Design HMI For Your LCD Projects With Nextion
30 December, 2020 2Gb, 4Gb, and 8Gb LPDDR4 SDRAMs with low power usage
16 April, 2018 Compact COM Express-based subsystem packs plenty of DAQs
20 February, 2019 Twelve PWM outputs from an ATtiny85
23 April, 2019 BIT4 is a 4Bit microcontroller – fully programmable with only three buttons.
