login
This is the image preview of the following page:
8 Channel RF Remote Receiver with Holtek and Serial Protocol
[Customadds id=643821] The project described here is 8 Channel RF Remote Receiver (Decoder). This 8-channel decoder is built using LICAL-EDC-DS001 chip from LINX. The board consists of the encoder/Decoder chip, 433Mhz RF Receiver module, and 10 x jumpers to set the address. Also, there is a heade... Read More
Image Downloads:
- full (1500x976)
- thumbnail (150x150)
- medium (850x553)
- medium_large (640x417)
- large (640x416)
- 1536x1536 (1500x976)
- 2048x2048 (1500x976)
- re_large (783x600)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x236)
- menu-24x24 (24x16)
- menu-36x36 (36x23)
- menu-48x48 (48x31)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x390)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x98)
RELATED POSTS
26 May, 2021 Win 1 of 5 Nordic Thingy:52’s from Nordic Semiconductor
23 November, 2015 Protecting the USB from over voltage and overcurrent threats
18 June, 2020 Boonton PMX40 40GHz RF Power Meter for USB-connected RF Power Sensors
1 August, 2019 Retina Display eDP Adapter For UP-Board
11 June, 2020 Effortlessly Create BOMs and Order Parts As You Design with UltraBOM for OrCAD
25 January, 2022 Sensirion LPG10-1000 Digital Planar Liquid Flow Sensor
