login
This is the image preview of the following page:
8 Channel RF Remote Receiver with Holtek and Serial Protocol
[Customadds id=643821] The project described here is 8 Channel RF Remote Receiver (Decoder). This 8-channel decoder is built using LICAL-EDC-DS001 chip from LINX. The board consists of the encoder/Decoder chip, 433Mhz RF Receiver module, and 10 x jumpers to set the address. Also, there is a heade... Read More
Image Downloads:
- full (1500x516)
- thumbnail (150x150)
- medium (850x292)
- medium_large (640x220)
- large (640x220)
- 1536x1536 (1500x516)
- 2048x2048 (1500x516)
- re_large (783x516)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- menu-24x24 (24x8)
- menu-36x36 (36x12)
- menu-48x48 (48x17)
- crp_thumbnail (292x236)
- sendpress-max (600x206)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x206)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x52)
RELATED POSTS
20 August, 2019 Axiomtek’s MANO521 – Intel® Coffee Lake-Based Thin Mini-ITX Motherboard
30 September, 2015 One case – over 100 possibilities of usage
15 June, 2016 Microchip announced MPLAB® Harmony Graphics Composer GUI Tool
6 May, 2024 Hardkernel’s ODROID-H4, H4+ and H4 Ultra SBC’s Features Intel N97, and i3-N305 and Intel SoC
1 October, 2020 SN-GC Series Laser Type Particulate Matter (PM) Sensor
21 July, 2021 VD6283TX Hybrid Filter Multispectral Sensor
