login
This is the image preview of the following page:
8 Channel RF Remote Receiver with Holtek and Serial Protocol
[Customadds id=643821] The project described here is 8 Channel RF Remote Receiver (Decoder). This 8-channel decoder is built using LICAL-EDC-DS001 chip from LINX. The board consists of the encoder/Decoder chip, 433Mhz RF Receiver module, and 10 x jumpers to set the address. Also, there is a heade... Read More
Image Downloads:
- full (1931x838)
- thumbnail (150x150)
- medium (850x369)
- medium_large (640x278)
- large (640x278)
- 1536x1536 (1536x667)
- 2048x2048 (1931x838)
- re_large (783x600)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x236)
- menu-24x24 (24x10)
- menu-36x36 (36x16)
- menu-48x48 (48x21)
- sendpress-max (600x260)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x260)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x65)
RELATED POSTS
13 September, 2024 Pololu H2 High-Power DC Motor Driver for Robotics
30 November, 2017 Teardown & Repair of a SRS DS345 30MHz Synthesized Function Generator
25 March, 2020 Kontron 3.5 inch Single Board Computer 3.5”-SBC-WLU with latest Intel® processor technology for demanding IoT applications
19 March, 2022 IXOLAR™ Thin 1.2 mm, 25% Efficiency Solar Cells
4 September, 2024 Milk-V Megrez: RISC-V AI PC Featuring ESWIN EIC7700X SoC for Advanced Computing
5 February, 2020 New carrier boards and mini-PCs for Jetson
