login
This is the image preview of the following page:
8 Channel RF Remote Receiver with Holtek and Serial Protocol
[Customadds id=643821] The project described here is 8 Channel RF Remote Receiver (Decoder). This 8-channel decoder is built using LICAL-EDC-DS001 chip from LINX. The board consists of the encoder/Decoder chip, 433Mhz RF Receiver module, and 10 x jumpers to set the address. Also, there is a heade... Read More
Image Downloads:
- full (1463x450)
- thumbnail (150x150)
- medium (850x261)
- medium_large (640x197)
- large (640x197)
- 1536x1536 (1463x450)
- 2048x2048 (1463x450)
- re_large (783x450)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- menu-24x24 (24x7)
- menu-36x36 (36x11)
- menu-48x48 (48x15)
- crp_thumbnail (292x236)
- sendpress-max (600x185)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x185)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x46)
RELATED POSTS
1 April, 2020 STMicroelectronics STM32H7A3/7B3 lines of microcontrollers include an Arm® Cortex®-M7 core
12 July, 2016 LT8335 – Low IQ Boost/SEPIC/ Inverting Converter with 2A, 28V Switch
9 November, 2023 The New Portenta Hat Carrier Bridges Arduino and Raspberry Pi Ecosystems
23 October, 2018 Infrared Temperature Sensor Array using AMG8833
30 December, 2019 Intel® NUC 8 Rugged PC
22 September, 2015 1A from the sugar cube sized module
