login
This is the image preview of the following page:
8 Channel RF Remote Transmitter with Holtek and Serial Protocol
[Customadds id=643821] The project described here is an 8 Channel RF remote transmitter This transmitter is built using LICAL-EDC-DS001 chip from LINX. The project consists of the Encoder/Decoder chip, a 433Mhz RF module as a wireless link, 8 x tactile switches for operations, 10 x jumpers to set... Read More
Image Downloads:
- full (1249x323)
- thumbnail (150x150)
- medium (850x220)
- medium_large (640x166)
- large (640x166)
- 1536x1536 (1249x323)
- 2048x2048 (1249x323)
- re_large (783x323)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x236)
- menu-24x24 (24x6)
- menu-36x36 (36x9)
- menu-48x48 (48x12)
- sendpress-max (600x155)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x155)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x39)
RELATED POSTS
8 December, 2015 DIY SWR and Power Meter
11 December, 2018 Compact, low-cost development board carries two USB host ports
26 June, 2018 BUK9J0R9-40H – A Super Junction MOSFET with Low On-State Resistance
17 January, 2019 SPD3303X / SPD3303X-E Series Programmable DC Power Supply
14 September, 2015 Siglent SDM3055 5.5 Digit Bench Multimeter Review
4 September, 2015 A Xively AMbient QUality MOnitor built on ATmega328
