login
This is the image preview of the following page:
AmpStrike - Battery Powered Bench Power Supply
Introduction This is a small bench power supply that is powered by two lithium-ion batteries. The project was inspired by Dave Jones from EEVblog but the design is completely mine. The voltage range is 0-20V regulated in 10mV steps and maximum current is 1A with current limit set in 1mA steps. Sch... Read More
Image Downloads:
- full (725x588)
- thumbnail (150x150)
- medium (300x243)
- medium_large (640x519)
- large (640x519)
- 1536x1536 (725x588)
- 2048x2048 (725x588)
- re_large (725x588)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x236)
- menu-24x24 (24x19)
- menu-36x36 (36x29)
- menu-48x48 (48x39)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x487)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x122)
RELATED POSTS
27 April, 2018 CH551 is a $1.80 USB Mini Development board based on the 8-bit C51 micro-controller
8 November, 2021 New SoMs from Rongpin Electronics Features Board-to-Board Connectors and Castellations
30 August, 2021 Walabot DIY 2 is a Wi-Fi Enabled Visual Stud Finder with 4D Imaging Technology
1 April, 2020 BlueNRG-M2 – Very low power application processor module for Bluetooth® low energy v5.0
15 August, 2018 Communication Between Two Arduinos Using NRF24L01
14 April, 2024 Adafruit’s Trinkey is A Thumb-Drive-Sized Temperature and Humidity Sensor
