login
This is the image preview of the following page:
Dual MOSFET Driver - Two Channel DC SSR Using MOSFETS & Gate Driver
[Customadds id=643821] The project presented here is a dual-channel MOSFET DC relay. The project is capable of driving a 5A load on each channel with an input supply of 48V DC. The LTC7067 chip drives the two high-side N-Channel MOSFETS with supply voltages up to 48V DC. Its powerful 0.8Ω pull-d... Read More
Image Downloads:
- full (1315x547)
- thumbnail (150x150)
- medium (850x354)
- medium_large (640x266)
- large (640x266)
- 1536x1536 (1315x547)
- 2048x2048 (1315x547)
- re_large (783x547)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x236)
- menu-24x24 (24x10)
- menu-36x36 (36x15)
- menu-48x48 (48x20)
- sendpress-max (600x250)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x250)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x62)
RELATED POSTS
3 November, 2016 Printable Circuits by PragmatIC Changing the IoT Future
30 August, 2021 Small-Sized Broadband Inductors for High-Impedance Performance in Vehicle-Mounted PoC
12 February, 2018 Espressif ESP32-PICO-KIT WiFi/WLAN+Bluetooth Module
15 November, 2021 Xassette-Asterisk RISC-V 64 SBC Features Allwinner’s latest D1s SoC and Sells for Less Than $10
20 July, 2020 PaperiNode, an Arduino-compatible flexible low power energy-harvesting LoRa-enabled electronic paper display
6 August, 2020 DIY GPS Tracker Features Three Arduino boards
