login
This is the image preview of the following page:
[Customadds id=643821] Introduction I have been using the toner transfer method for about 9 years with great results. Occasionally I would need a board with finer traces and I would use UV method. My exposure setup allowed only a single sided board to be made and it was composed of a 30c... Read More
Image Downloads:
- full (453x519)
- thumbnail (150x150)
- medium (262x300)
- medium_large (453x519)
- large (453x519)
- 1536x1536 (453x519)
- 2048x2048 (453x519)
- re_large (453x519)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x236)
- menu-24x24 (21x24)
- menu-36x36 (31x36)
- menu-48x48 (42x48)
- woocommerce_thumbnail (300x225)
- woocommerce_single (453x519)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x172)
RELATED POSTS
10 July, 2019 OurPCB Published a Guide on ‘Bluetooth Circuit Board-How To Count As a High-Quality Bluetooth Board’
15 January, 2020 Meet VAR-SOM-MX8M-MINI; Latest SOM based on NXP’s i.MX 8M Mini processor
6 May, 2020 Aurora Mb E-Paper is an intelligent monochrome e-paper display
5 February, 2021 For higher power density and reduced BoM: Melexis MLX91220/21 current sensors at Rutronik
8 September, 2022 Orolia ruggedises mini rubidium atomic clock
14 February, 2022 Single Key Touch Sensor using LM2907
