login
This is the image preview of the following page:
Linear Actuator Controller with Limit Switch to prevent Overextension and Retraction
[Customadds id=643821] The project described here is a very useful device for use with linear actuators. This controller prevents the actuator from reaching the physical movement limits of the actuator, thus it prevents burnout of motor and physical/mechanical damage to the actuator itself to the... Read More
Image Downloads:
- full (1500x1500)
- thumbnail (150x150)
- medium (850x850)
- medium_large (640x640)
- large (640x640)
- 1536x1536 (1500x1500)
- 2048x2048 (1500x1500)
- re_large (783x600)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x236)
- menu-24x24 (24x24)
- menu-36x36 (36x36)
- menu-48x48 (48x48)
- sendpress-max (600x600)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x600)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x150)
RELATED POSTS
7 November, 2016 Environmental data display on an RGB matrix panel
5 October, 2015 Decoding and sending 433MHz RF codes with Arduino
28 November, 2018 Arduino MKR Motor Carrier
21 April, 2017 Raspberry Pi Publishing MQTT Messages to ESP8266
2 June, 2016 LED current regulator has low dropout
12 January, 2018 Sensirion presents CO2 and RH/T Sensor Module
