login
This is the image preview of the following page:
MCU controlled Bluetooth automation with infrared sensor
[Customadds id=643821] The microcontroller used is 0822 zilog encore! 8k series (soic,28pin) as shown on the figure. Is a programmable microcontroller, the functions used are the GPIO and the UART of the chip. GPIO is used on led indicators, and the UART is used for giving and reading AT COMMANDS... Read More
Image Downloads:
- full (640x480)
- thumbnail (150x150)
- medium (300x225)
- medium_large (640x480)
- large (640x480)
- 1536x1536 (640x480)
- 2048x2048 (640x480)
- re_large (640x480)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x236)
- menu-24x24 (24x18)
- menu-36x36 (36x27)
- menu-48x48 (48x36)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x450)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x113)
RELATED POSTS
24 November, 2024 Raspberry Pi AI HAT+ Brings Up to 26 TOPS with Hailo-8 and Hailo-8L Accelerators
28 September, 2016 Using VL53L0X With Arduino to Measure Height
4 November, 2020 DT-BL10 – Low-Power IoT Development Board Powered by RISC-V Core
3 December, 2024 Palmshell SLiM X4L is a portable Intel-based Mini- PC
12 January, 2017 ONO, $99 Smartphone-Powered 3D Printer
31 October, 2021 Seeed Studio Grove SSD1306 0.66″ OLED Display
