Archives: Projects
![Voice Echo Processor Module – Delay Device for Sound Effects, Echo, Reverb Voice Echo Processor Module – Delay Device for Sound Effects, Echo, Reverb](https://www.electronics-lab.com/wp-content/uploads/2022/08/005-6-1024x569.jpg)
Voice Echo Processor Module – Delay Device for Sound Effects, Echo, Reverb
The voice echo or digital delay sound effects project presented here is suitable for applications such as Karaoke, multimedia, musical instrument effects, electronics toys, animatronics, etc. The project is based on PT2399 chip, with an operating supply of 5V DC, and approx. 30mA...
Continue Reading![Ultra-High-Speed, Low-Distortion – Differential-to-Single-Ended Line Receivers with Enable Ultra-High-Speed, Low-Distortion – Differential-to-Single-Ended Line Receivers with Enable](https://www.electronics-lab.com/wp-content/uploads/2022/08/006-6-1024x594.jpg)
Ultra-High-Speed, Low-Distortion – Differential-to-Single-Ended Line Receivers with Enable
The project presented here is a differential line receiver that offers unparalleled high-speed, low-distortion performance and is ideally suited for digital, video, and RF signal-processing applications. These receivers offer a small-signal bandwidth of 550MHz and have a high slew...
Continue Reading![Over Current Trip Switch – Over Current Shutdown Relay Over Current Trip Switch – Over Current Shutdown Relay](https://www.electronics-lab.com/wp-content/uploads/2022/08/001-4-1024x697.jpg)
Over Current Trip Switch – Over Current Shutdown Relay
The project presented here is an over-current trip switch. It provides protection to a load when over current condition occurs. Basically, the project trips the relay when there is a short circuit or the load starts drawing much current. When the condition is favorable, press the...
Continue Reading![Mono 2W – Switch-Mode (Class D) Audio Power Amplifier Mono 2W – Switch-Mode (Class D) Audio Power Amplifier](https://www.electronics-lab.com/wp-content/uploads/2022/08/007-4-e1661702198452-1024x698.jpg)
Mono 2W – Switch-Mode (Class D) Audio Power Amplifier
This is a compact size, mono, switch-mode (Class-D) audio power amplifier intended for multimedia and general-purpose high-power applications. It has greater than 87% efficiency and is capable of delivering 2W maximum continuous power to a 4Ω load. The project is designed to be...
Continue Reading![4 Channel High-Speed – Robust-EMC Reinforced Digital Isolators 4 Channel High-Speed – Robust-EMC Reinforced Digital Isolators](https://www.electronics-lab.com/wp-content/uploads/2022/08/004-3-1024x558.jpg)
4 Channel High-Speed – Robust-EMC Reinforced Digital Isolators
The project described here is a high-performance, quad-channel digital isolator with a 5000VRMS isolation rating as per UL1577. The ISO7740 IC provides high electromagnetic immunity and low emissions at low power consumption while isolating CMOS or LVCMOS digital I/O s. Each isolation...
Continue Reading![Really Large Size 7 Segment Display with SPI Interface – 8 Channel SPI Relay Board Really Large Size 7 Segment Display with SPI Interface – 8 Channel SPI Relay Board](https://www.electronics-lab.com/wp-content/uploads/2022/08/004-2-1024x636.jpg)
Really Large Size 7 Segment Display with SPI Interface – 8 Channel SPI Relay Board
This is an SPI Interface multichannel relay board for high voltage AC or low voltage DC loads. It is ideal for controlling LEDs lights, coffee machines, fans, pumps, or other high-voltage electrical appliances. The board also breaks out the SPI header, so controlling other boards is...
Continue Reading![Under Voltage Lockout Relay – Latching Voltage Monitor Under Voltage Lockout Relay – Latching Voltage Monitor](https://www.electronics-lab.com/wp-content/uploads/2022/08/004-1-1024x649.jpg)
Under Voltage Lockout Relay – Latching Voltage Monitor
This project prevents/disconnects the load when an under-voltage condition occurs. The circuit latches the output when input sense voltage drops below the lockout threshold. Lockout threshold voltage can be adjusted using the onboard trimmer potentiometer PR1. Tactile switch SW1 is...
Continue Reading![Easy Prototype Board for SOIC8/MSOP8/SOT23-3/4/5/6 Packages Easy Prototype Board for SOIC8/MSOP8/SOT23-3/4/5/6 Packages](https://www.electronics-lab.com/wp-content/uploads/2022/08/002-1024x703.jpg)
Easy Prototype Board for SOIC8/MSOP8/SOT23-3/4/5/6 Packages
This is an 8-pin SOIC/MSOP/SOT23-3/4/5/6 prototype board. This is a blank PCB that allows the operation of many chips from various manufacturers. Each device pin is connected to a pull-up resistor, a pull-down resistor, an in-line resistor, and a capacitor on VCC. All pins are...
Continue Reading