Archives: Projects

16 Channel Infra-Red remote controller is based on PIC16F73 Microcontroller from Microchip. The receiver part follows RC5 (Philips) Code Format. Tiny receiver provides 16 latch outputs or 8 Latch + 8 Momentary outputs by closing Jumper J1. All outputs are TTL and can drive Relay board...

Tiny Bar-Graph current meter displays a Red color bright, easy to read display of current range from 0 to 1A.  This Bar-Graph has 20 segments in single color and display 0 to 1Amp Current. The Barograph current monitor is based on PIC microcontroller with 10 Bit resolution ADC. ...

Tiny Bar-Graph displays provide a Red color bright, easy to read display of Voltage range of 0 to 5V.  This Bar-Graph has 20 segments in single color and display 0 to 5V DC. The Barograph Voltage monitor is based on PIC microcontroller with 10 Bit resolution ADC.  This high...

Dark Sensitive Lamp controller project switches a load connected to it when light falling on LDR (Light Dependent Resistor)  goes bellow set point.  It could be used as an automatic street light application. The project is based on Triac and doesn’t requires additional DC supply,...

This PROJECTS  will turn your favorite music into light effects, a microphone picks up the sound and gives  light effects with 6 Red LEDs, ideal for creating fun atmosphere at parties & discos. Supply 9V-12V DC. Features Supply 9V-12V DC (PP3 9V Battery) On Board Preset...

This tiny module has been designed to be used in Robotics, Power tools, automotive applications etc. The module is based on MC33886 from NXP. The MC33886 is a monolithic power IC comprising control logic, charge pump, gate drive, and low RDS(ON)MOSFET, H-Bridge output circuitry in a...

The DC/DC inverting switching regulators project is specifically designed to invert input voltages to negative outputs. It offer input voltage ranges from 4.5V to 6V and output -12V 100mA The MC34063A IC is heart of the project from On semiconductor. The MC33063A is a monolithic...

Parallel port I/O break out board designed for Hobby CNC, Routers and Motion controller ,  This Board is an easy solution to driver stepper Motor driver, AC Servo (with Step-DIR Driver) and DC servo (with Step-DIR Driver), The Board is compatible with various CNC software specially...