Archives: Projects
![0-20V Bargraph Voltmeter 0-20V Bargraph Voltmeter](https://www.electronics-lab.com/wp-content/uploads/2015/08/photo.jpg)
0-20V Bargraph Voltmeter
0 - 20V LED Voltmeter kit displays the voltage of the source using 20 LED's. This projects is based on the famous LM3914 IC from National Semiconductor. Power Supply Input: 5 VDC Max @ 30 mA in DOT mode and 300 mA in BAR mode Specifications Output: 20 LED's Range...
Continue Reading![Geiger counter with SBM20 tube Geiger counter with SBM20 tube](https://www.electronics-lab.com/wp-content/uploads/2015/08/general_vue2-675x10241-675x1024.jpg)
Geiger counter with SBM20 tube
I “rebuild” my Geiger counter, the SBM-20 tube was initially inside the box, so, i have put this one inside a 32mm diam plastic tube, for more convenience, wired through a XLR3 cable. The LCD display alternatively, the “count per minutes” and result on: milli Sievert/year...
Continue Reading![RS232 to RS485 Module RS232 to RS485 Module](https://www.electronics-lab.com/wp-content/uploads/2015/08/C038_1.jpg)
RS232 to RS485 Module
RS232 to RS485 Board (R) provides a seamless connection of the PC to an RS485 network. Simplex connection of this interface to the RS485 network Easy way of switching the modes between Receiver and Transmitter ( Slide Switch) 5 V regulated supply provision on...
Continue Reading![DTMF Module DTMF Module](https://www.electronics-lab.com/wp-content/uploads/2015/08/C039_1.jpg)
DTMF Module
DTMF Development Board offers a very convenient way to generate DTMF tones and demodulate it. It uses the famous MT8880/MT8888 DTMF transreceiver IC. Easy 10 pin Box Header connector for interfacing data/control pins Crystal derived frequency source for accurate...
Continue Reading![ATmega16/32 Development Board ATmega16/32 Development Board](https://www.electronics-lab.com/wp-content/uploads/2015/08/C032_1.jpg)
ATmega16/32 Development Board
ATmega16/32 Development Board provides a very simple and cost effective platform for prototyping solution. The compact design provides connection to all the pins of the microcontroller for the user. Prototyping solution available for 40-pin ATmega series AVR...
Continue Reading![GLCD Module GLCD Module](https://www.electronics-lab.com/wp-content/uploads/2015/08/PIC.jpg)
GLCD Module
GLCD Adapter Board offers an easy way to interface a standard GLCD to your project. 5 VDC supply sourced through the interfacing Box Header connector Two separate box header connector available for interfacing of data bus and control bus to the interfacing unit On...
Continue Reading![2.5A Bipolar Stepper Motor Driver LV8772E 2.5A Bipolar Stepper Motor Driver LV8772E](https://www.electronics-lab.com/wp-content/uploads/2015/07/PIC1.jpg)
2.5A Bipolar Stepper Motor Driver LV8772E
Tiny Board has been designed around LV8772 IC from On-Semi. This driver is capable of micro-step drive and supports 4W 1-2 phase excitation. It has Low on Resistance with motor current selectable in four steps. The board is equipped with unusual condition warning LED and...
Continue Reading![LCD Adapter Board LCD Adapter Board](https://www.electronics-lab.com/wp-content/uploads/2015/07/PIC0031.jpg)
LCD Adapter Board
Simple LCD adapter board offers an easy way to interface a standard 16X2 LCD to your project. Specifications Very Tiny PTH PCB Onboard Preset to set the Contrast Easy interface with 10 PIN Box Header...
Continue Reading