Archives: Projects
![Flyback Transformer Driver Flyback Transformer Driver](https://www.electronics-lab.com/wp-content/uploads/2015/04/flyback1.gif)
Flyback Transformer Driver
General Description and circuit operation This is an efficient flyback driver for modern cylindrical rectified television flybacks. Many sites doesn't provide circuits driving these transformers, they simply say that they are bad. I don't agree. In fact I built this circuit. I...
Continue Reading![Tiny DDS – Open source DDS generator Tiny DDS – Open source DDS generator](https://www.electronics-lab.com/wp-content/uploads/2015/04/DDS.jpg)
Tiny DDS – Open source DDS generator
This project is an open source (hardware & software) DDS generator, based on: smart TFT module, AD9834, LM7171 fast amplifier. Description The homemade function generator is a quite common project on the internet. We can find different ways to do it: The quick &...
Continue Reading![NiCad-NiMh Battery Monitor NiCad-NiMh Battery Monitor](https://www.electronics-lab.com/wp-content/uploads/2015/04/NICAD_NIMH_BATTERY_MONITOR.jpg)
NiCad-NiMh Battery Monitor
This project is a NiCad-NiMh Battery Monitor based on LM3914 IC Description The simple project can be used as test gear. Its easy way to monitor the battery voltages, especially dry cell, NICAD, NIMH, supply up to 1.5 Voltage. Battery Monitor range 0.15V to 1.5V. The...
Continue Reading![Advanced LC meter Advanced LC meter](https://www.electronics-lab.com/wp-content/uploads/2015/04/LCM32-806x1024.jpg)
Advanced LC meter
This project is an advanced LCR meter based on PIC16F690 microcontroller. Description After finishing my last project - "Simple LC meter", there were some discussions in the forum I am a member of, that ability to measure electrolytic capacitors would be very useful in...
Continue Reading![Simple LC meter Simple LC meter](https://www.electronics-lab.com/wp-content/uploads/2015/04/LCmeter_5-1024x681.jpg)
Simple LC meter
This project is a simple LC meter based on PIC16F682A mcu. Description Here is another piece of laboratory equipment - LC meter. This type of meter, especially L meter is hard to find in cheap commercial multimeters. Schematic of this one came from this web...
Continue Reading![Thermocouple Type-K amplifier Thermocouple Type-K amplifier](https://www.electronics-lab.com/wp-content/uploads/2015/04/PCB_photo_2.png)
Thermocouple Type-K amplifier
This project is a simple Thermocouple K-type amplifier based on AD595 IC. This amplifier converts the thermocouple output voltage (uV) to 10mV/C. This voltage can be easily further converted by an ADC of any microcontroller. Description AD595 Thermocouple Type-K Amplifier...
Continue Reading![Simple SMD LED tester Simple SMD LED tester](https://www.electronics-lab.com/wp-content/uploads/2015/04/photo_115-1024x781.jpg)
Simple SMD LED tester
This project is a simple LED tester and LED polarity checker. It can be used to check 1206, 0805, 0603 and 5mm LEDs. All parts are readily available and they are very cheap. Description Usage is very simple. Just press the tack switch to first check the battery is good....
Continue Reading![Low Frequency Spectrum Analyzer for Automotive Suspension Analysis Low Frequency Spectrum Analyzer for Automotive Suspension Analysis](https://www.electronics-lab.com/wp-content/uploads/2015/04/Screenshot-1024x576.png)
Low Frequency Spectrum Analyzer for Automotive Suspension Analysis
This project is an accelerometer data acquisition system for automotive suspension analysis. In other words it's a low frequency spectrum analyzer based on Lanchpad TIVA Series from Texas Semiconductors. Description It' s a spectrum analyzer for mechanical frequencies (max. 50...
Continue Reading