login
This is the image preview of the following page:
Stepper Motor Based Rotary Encoder with Clock and Up/Down Direction Signal Output
[Customadds id=643821] This project enables the users to use a stepper motor as a rotary encoder for position control and Up/Down direction control. A bipolar stepper motor can be used as a rotary sensor as it generates two channel strings of pulses by turning the shaft. The circuit provides Step... Read More
Image Downloads:
- full (1500x880)
- thumbnail (150x150)
- medium (850x499)
- medium_large (640x376)
- large (640x376)
- 1536x1536 (1500x880)
- 2048x2048 (1500x880)
- re_large (783x600)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x236)
- menu-24x24 (24x14)
- menu-36x36 (36x21)
- menu-48x48 (48x28)
- sendpress-max (600x352)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x352)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x88)
RELATED POSTS
2 June, 2016 42V, 3.5A-out buck regulator operates at 175°C ambient
10 June, 2016 Seeed Studio miniature soldering iron – Review
28 December, 2016 Replacing a dead iPhone battery
28 December, 2017 Pressure Sensor of the Future, Today
10 October, 2018 USBNinja – BadUSB embedded into a USB cable
12 April, 2016 Using BMP180 for temperature, pressure and altitude measurements
