Tag: DC-DC
LC-04 4 Channel Logic Converter 3.3V – 5.0V
If you have ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The LC-04 bi-directional logic level converter is a small device that safely steps down 5V signal to 3.3V and steps up 3.3V to 5V at the same time. In this instructable, mybotic explained...
Continue ReadingLT8630 – 100V, 600 mA synchronous buck DC/DC betters 93% efficiency
LT8630 is a 600 mA, 100V input capable synchronous step-down switching regulator using synchronous rectification to deliver efficiency as high as 93% while Burst Mode operation keeps quiescent current under 7 µA in no-load standby conditions. by By Graham Prophet @...
Continue Reading18V, 5A buck-boost DC/DC delivers 95% efficiency
LTC3119 is a synchronous current mode monolithic buck-boost converter that outputs up to 5A of continuous output current in buck mode from a wide variety of input sources, including single- or multiple-cell batteries, unregulated wall adapters as well as solar panels and...
Continue ReadingRegulator offers independent outputs
Susan Nordyk @ edn.com writes: Housed in a 15×9×2.42-mm over-molded BGA package, the LTM8049 µModule dual-output DC/DC converter from Linear Technology is configurable for a combination of SEPIC and/or inverting operation by simply grounding the appropriate output rail. All that...
Continue ReadingDual input, 2.5A step-down DC/DC achieves 95% efficiency
by Graham Prophet @ edn.com: LTC3126 is a 2.5A, 2.4V to 42V input, synchronous step-down switching regulator with integrated dual input PowerPath control. Its power stage topology enables operation from either of two independent power sources, with seamless, internally controlled...
Continue Reading100Vin, 5W out regulator uses primary-side control
LT8303 is a monolithic flyback regulator in a TSOT-23 package that simplifies the design of isolated DC/DC converters. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no opto-isolator, LT1431 or third winding for regulation....
Continue ReadingLTC7851 – Quad Output, Multiphase Step-Down Voltage Mode DC/DC Controller with Accurate Current Sharing
The LTC7851 is a quad output multiphase synchronous step-down DC/DC controller with accurate current sharing between phases and differential output voltage sensing. This controller works in conjunction with external power train devices such as DrMOS and power blocks as well as...
Continue ReadingHow Boost Converters (DC-DC Step-Up) Works
A look into how boost converters work in a very visual format. Try this circuit: http://goo.gl/nkHq9H How Boost Converters (DC-DC Step-Up) Works -...
Continue Reading