login
Tag: DDS
Joy-IT PSG9080 DDS Function Generator – Programmable Signal generator
The programmable Signalgenerator PSG9080 can output many different waveforms like f. i. sine, square, triangle, pulse wave, and arbitrary waveforms. It has a generous frequency range from 1nHz to 80 MHz and a sampling rate of 33 MSa/s. The housing is made high-quality workmanship and...
Continue Reading
Free Elektor Article: DDS Function Generator
DDS chips are readily available, greatly simplifying the design of the analog part of a wide-range function- or signal generator. All you need to do (they say!) is choose one, add some suitable output circuitry, pick a microcontroller, provide a user interface and start programming. To...
Continue Reading
12$ 30MHz signal generator using Arduino
A signal generator is an electronic device that generates electronic signals and waveforms. These electronic signals are either repeating or non-repeating as per the requirements and field of applications. It is generally used in designing, testing, troubleshooting and repairing...
Continue Reading
Arduino Network Analyzer
Brett Killion has published his Arduino shield a Network Analyzer on an Arduino Shield which covers from 0-72MHz. The network analyzer shield uses an Analog Devices AD9851 DDS chip clocked at 180MHz which will output a sine wave at any frequency from 0Hz and 72MHz. The DDS output is...
Continue Reading
Elektor DDS Function Generator
this is a DDS Funtion Generator by Theodorou Gerasimos: DDS chips are readily available, greatly simplifying the design of the analog part of a wide-range function- or signal generator. All you need to do (they say!) is choose one, add some suitable output circuitry, pick a...
Continue Reading
Arduino DDS AD9850 Antenna Analyzer
This is a no frills DIY Analyzer intended for frequencies ranging from 1.6 to 30 Mhz. This simple Antenna Analyzer could be a nice project for anyone just getting started in setting up a station on the HF bands. Arduino DDS AD9850 Antenna Analyzer -...
Continue Reading
