Tag: ESP32-S3

The ESP32-S3 1.91-inch AMOLED development board is designed for rapid prototyping of IoT and portable applications. Powered by the ESP32-S3R8 chip with a 240 MHz dual-core processor, it supports 2.4 GHz Wi-Fi and Bluetooth BLE 5, 16 MB Flash, and 8 MB PSRAM. Its capabilities are further...

The OMGS3 is a compact, fully-featured ESP32-S3-PICO board from the Unexpected Maker. With its dual-core architecture and QSPI memory, it can effortlessly handle more than one task at a time. It has wireless connectivity supporting Wifi, Bluetooth, and an Onboard High Gain Antenna. The...

Waveshare has recently launched the ESP32-S3-AMOLED-1.91-M dev board which is an ESP32-S3-based board with a 1.91″ AMOLED display, designed for rapid prototyping and IoT or portable projects Powered by the ESP32-S3R8 chip, it includes a 32-bit LX7 dual-core processor (up to 240MHz),...

Lilygo has recently launched the T-Embed, an IoT-embedded panel designed for programmable development, featuring a compact design with ABS and PC material. The ESP32-S3 MCU powers it and supports Wi-Fi and Bluetooth 5, including Bluetooth mesh. The panel includes a 1.9-inch IPS color...

Lilygo has recently launched the T-Embed CC1101, a transceiver module that integrates an ESP32-S3 dual-core LX7 microprocessor and a built-in Sub-GHz module based on the CC1101 chip, designed for communication in the 300-348 MHz, 387-464 MHz, and 779-928 MHz frequency bands. It features...

Unexpected Maker has recently released OMGS3 ESP32-S3 Compact Board which the company is calling the world's smallest yet full features ESP32-S3 dev board with just 25x10mm in size. Which in contrast replaces the Nano S3 and TinyS2 dev board which we have written about in court previous...

LILYGO has introduced the T-ETH-Elite, an ESP32-S3-powered IoT board featuring an Ethernet RJ45 port with Power over Ethernet (PoE) support and a 40-pin GPIO header for stackable shields. This board is designed for building IoT gateways with versatile connectivity options, including...

The NBIOT/LTE-M1 Air Monitor uses an ESP32-S3-WROOM-1 controller and a SIM7080G module for cellular data transmission. It monitors temperature, humidity, CO2 levels, TVOC, and light intensity. The device is powered by an internal 18650 LiPo battery, charged by a solar panel with MPPT...