Tag: Ethernet

In a recent development, Arduino partnered with Microchip to develop an Arduino SPE and RS485 Shield add-on board for the Arduino UNO R4 boards that enables Single-Pair Ethernet (SPE) and RS485 connectivity based on the IEEE 802.3bw standard with Power over Data Line (PoDL)...

Waveshare has recently released an ESP32-S3-ETH Development Board that combines an ESP32-S3 microcontroller, Ethernet (with optional PoE) and a camera interface.  The board is available in four variants the ESP32-S3-ETH (ETH development board only), the ESP32-S3-ETH-CAM-KIT (ETH...

The NXP has recently introduced RW612, a tri-radio wireless MCU integrating Wi-Fi 6, Bluetooth Low Energy (LE) 5.4, and 802.15.4 radios. Powered by a 260 MHz Arm Cortex-M33 core with TrustZone-M, it includes 1.2 MB of SRAM and a high-bandwidth Quad SPI interface with secure decryption...

Microchip has recently released the PIC32MZ-W1 Wi-Fi MCU along with 20 other wifi SoCs including link controllers, network controllers, and plug-and-play modules. The most important one among them is the PIC32MZ-W1 wireless MCU because of its 32-bit MIPS M-class core running at up to...

The NanoKVM-PCIe is a recent solution from Sipeed, designed to simplify Remote Server Management of ATX PC cases and 2U servers. Built on the RISC-V architecture, it offers low power consumption and easy installation, with compatibility for both low-profile and high-profile PCIe...

The WIZnet has recently launched two Raspberry Pi RP2350-based - W5100S-EVB-Pico2 and W5500-EVB-Pico2 Embedded Internet controllers with TCP/IP stack that simplifies Internet connectivity for embedded systems. The W5100S supports both SPI (up to 70MHz) and Parallel System Bus...

The Acelink SM81 SOM is a compact, high-power WiFi 6/6E system-on-module (SOM) designed for IoT applications. It features a MediaTek Filogic 820 (MT7981A/B) SoC with support for dual-band concurrent operation and offers a variety of interfaces including USB, SPI, I2C, and Ethernet. With...

Lattice Semiconductor has introduced the MachXO5D-NX FPGA family, which integrates a hardware root of trust (RoT) into low-power FPGAs to address security challenges. By combining on-chip Flash memory and hardware encryption, these FPGAs minimize code capture risks during load time. The...