Tag: GPIO

Adafruit has launched the Feather RP2350, a development board powered by Raspberry Pi's RP2350 chip. It features 8MB of flash, a 22-pin HSTX output port, and a Stemma QT connector for easy sensor integration, along with an optional PSRAM slot. Designed for both beginners and experienced...

The D-Robotics RDK X3 Development Board is a versatile platform designed for edge inference and robotics applications, powered by a Quad-core ARM Cortex-A53 processor and dual-core Bernoulli architecture with 5 Tops inference capability. It offers options for 2GB or 4GB LPDDR4 RAM, a...

The Tindie has recently launched Edgeberry, an open-source platform developed by SpuQ in Belgium for building IoT Edge solutions using a Raspberry Pi. This IoT includes a base board, hardware cartridges, and software to enhance Raspberry Pi’s IoT capabilities. The Edgeberry Base Board...

The RP2350 is a dual-core microcontroller featuring two ARM Cortex M33 and two Hazard3 RISC-V processors, with a selectable boot option for any two cores. It operates at 150 MHz, has 520 kB SRAM in 10 banks, and includes peripherals like two UARTs, two SPI controllers, two I2C...

Waveshare's RP2040-Touch-LCD-1.69 is a compact MCU board built around Raspberry Pi's RP2040 microcontroller. It features a dual-core Arm Cortex M0+ processor running up to 133 MHz, with 264KB of SRAM and 16MB of Flash memory. The board includes a 1.69-inch capacitive touch display, a...

The Vecow TGS-1000 Series, including the TGS-1000 and TGS-1500 models, is a compact, fanless embedded computer with Intel Core Ultra Meteor Lake processors, featuring integrated CPU, GPU, and NPU. It supports up to 96GB DDR5 memory and offers expandable options for networking, serial...

Radxa has launched a new single-board computer this month, featuring the Intel N100 low-power processor. It is now available for preorder from multiple distributors in 4GB and 8GB RAM configurations. Key features of this SBC include Wi-Fi 6, an M.2 slot for NVMe SSDs, and an RP2040 for...

Arduino has announced two new entries in its Opta programmable logic controller (PLC) family, designed for those projects that are a little too complex for a single controller: the Opta Digital and Opta Analog Expansion Modules. These new modules offer additional pins and true analog...