Tag: half-bridge

The role of power supply is crucial for electronic circuits because without sufficient power, the circuit cannot function at its optimal level. On the other hand, an exceeded power supply can deteriorate the circuit components by heating effect. There are usually two choices for power...

In past, we have published many brushed dc motor driver boards for various projects and usually, they have some sort of limitations, as some of them are large in size, require large size heatsink, doesn’t have current feedback, they don’t have overload protection, some require...

Texas Instruments UCC27288 Half-Bridge Driver is a robust N-channel MOSFET driver with a maximum switch node (HS) voltage rating of 100V. It allows for two N-channel MOSFETs to be controlled in half-bridge or synchronous buck configuration based topologies. Its 3.5A peak sink current...

The project presented here is a versatile high voltage Half-Bridge with current feedback. The board is built using L6390 IC from ST Semiconductor. It is suitable for DC-DC converters, EHT drivers, induction heater drivers, battery chargers, LED drivers, DC motor speed controller and...

STSPIN32F025x and STSPIN32F060x system-in-package are an extremely integrated solution for driving three-phase applications STSPIN32F025x and STSPIN32F060x system-in-package are an extremely integrated solution for driving three-phase applications. It embeds an STM32F031 featuring...

This motor driver circuit can drive a brushed DC motor with up to 250W of continuous load. The project can be controlled with the general logic IO-Ports of any microcontroller. Either an Arduino Uno or other microcontroller can be used as the control board. The project uses two IFX007T...

The NCP51820, a high-speed gate driver, is designed to meet the requirements of driving enhancement mode. The NCP51820, a high-speed gate driver, is designed to meet the requirements of driving enhancement mode (e-mode) and gate injection transistor (GIT) GaN HEMT power switches in...

15 A 100V Isolated Half bridge driver project intended to be used for DC-DC converters, inverters, LED driver and motor driver applications. This projects is really helpful in industrial applications where noise is a concern since project provides optical isolation between...