Tag: humidity
![A Tutorial For Launching Your First Balloon A Tutorial For Launching Your First Balloon](https://www.electronics-lab.com/wp-content/uploads/2015/10/2015-10-05-13.38.32-2-1024x576.jpg)
A Tutorial For Launching Your First Balloon
Here is a nice tutorial about launching you first ballon into space. Also tracking device information is provided. Source is available here: There are a lot of reasons to put together a weather balloon launch. Its a great project for a STEM /STEAM class, it requires planning,...
Continue Reading![Record from SOS webinar – Everything you have ever wanted to know about Physics of Humidity Record from SOS webinar – Everything you have ever wanted to know about Physics of Humidity](https://www.electronics-lab.com/wp-content/uploads/2015/10/record-from-sos-webinar-everythi-1024x576.jpg)
Record from SOS webinar – Everything you have ever wanted to know about Physics of Humidity
Accuracy in a whole range of relative humidity measurement? You could find out during Sensirion webinar. Did you miss our webinar? Watch the video - record... What´s possible and what not in the temperature and humidity measurement? Design Guidance & Handling Instructions for...
Continue Reading![How to Set Up the DHT11 Humidity Sensor on an Arduino How to Set Up the DHT11 Humidity Sensor on an Arduino](https://www.electronics-lab.com/wp-content/uploads/2015/10/Arduino-DHT11-Humidity-and-Temperature-Sensor-With-LCD-Output-1024x657.png)
How to Set Up the DHT11 Humidity Sensor on an Arduino
by circuitbasics.com: Because of their low cost and small size, DHT11 humidity and temperature sensors are perfect for lots of different DIY electronics projects. Some projects where the DHT11 would be useful include remote weather stations, home environment control systems, and...
Continue Reading![Adding Sensors to Monitor Hive Health Adding Sensors to Monitor Hive Health](https://www.electronics-lab.com/wp-content/uploads/2015/10/bees.png)
Adding Sensors to Monitor Hive Health
by Nathan Seidle @ makezine.com: The Digital Beehive uses Wi-Fi to broadcast a beehive’s weight, humidity, temperature, and battery voltage every minute to SparkFun’s data channel service called Phant. The raw data can be seen here but you can view some prettier graphs of the...
Continue Reading![Humidity sensor using 8051 Humidity sensor using 8051](https://www.electronics-lab.com/wp-content/uploads/2015/10/humidity-sensor-e1443683380265.png)
Humidity sensor using 8051
by circuitstoday.com: This project is about a simple humidity sensor based on 8051 microcontroller. Humidity sensor is also called hygrometer. This circuit can sense relative humidity (RH) from 20% to 95% at an accuracy of 5%. The humidity information is displayed on a 16×2 LCD...
Continue Reading![Get rid of unpleasant odors easily and effectively Get rid of unpleasant odors easily and effectively](https://www.electronics-lab.com/wp-content/uploads/2015/09/obr1756_1-e1443425923290.jpg)
Get rid of unpleasant odors easily and effectively
USM-MEMS-VOC module evaluates rate of air pollution by contaminants such as cigarette smoke and cooking odors and allows control of air ventilation system on demand. Modul USM-MEMS-VOC is based on the innovative and highly stable TGS 8100 MEMS semiconductor sensor TGS8100 from...
Continue Reading![Make a Weather Station With a Raspberry Pi 2 Make a Weather Station With a Raspberry Pi 2](https://www.electronics-lab.com/wp-content/uploads/2015/09/raspberry-pi-weather-station-00-e1443164005424.jpg)
Make a Weather Station With a Raspberry Pi 2
Jeremy Morgan @ jeremymorgan.com writes: Today I’m going to show you how to make sort of a mini weather station with a Raspberry Pi. This is an ongoing project of mine that I’ve been tinkering with so I’ll share my learnings with you. It started with a project I wrote about...
Continue Reading![A Spark.io Indoor Ambient Quality Monitor A Spark.io Indoor Ambient Quality Monitor](https://www.electronics-lab.com/wp-content/uploads/2015/09/spark_io_indoor_ambient_quality_monitor.jpg)
A Spark.io Indoor Ambient Quality Monitor
Davide Gironi has build an indoor ambient quality monitor based on particle.io : SXAM (Spark to Xively AMbient quality monitor), is an ambient quality monitor that logs 4 environmental parameters to the xively.com and display the ambient status by using for RGB leds. SXAM logs:...
Continue Reading