Tag: I/O
DFI RPS101/RPS103 Mini-ITX Motherboards Support 14th, 13th, and 12th Gen Intel Core Processors with Quad Display Output, Dual 2.5GbE LAN, Multiple M.2 Slots and PCIe Gen5 Expansion
DFI has recently announced the RPS101/RPS103 series thin Mini-ITX motherboards designed for 12th, 13th, and 14th Gen Intel Gen CPUs that support up to 64GB of DDR5 memory. Supported by Intel 700 series UHD Graphics, it is capable of delivering 4K high-resolution quad display outputs,...
Continue ReadingPhyx LANA TNY is A Low-Cost CH32V203 RISC-V Development Board with SMD Pin Expansion
Phyx has created the LANA TNY-CH32V203, a compact development board, inspired by Adafruit's QT Py and Seeed Studio's XIAO, but with added SMD pins for extra I/O options and a built-in WS2811 compatible LED output. It's powered by the WCH CH32V203 RISC-V microcontroller, which has a...
Continue ReadingTexas Instruments TCA9536 4-Bit I/O Expander
Texas Instruments TCA9536 4-Bit I/O Expander is for the I2C bus and is designed for 1.65V to 5.5V VCC operation. It provides general-purpose remote I/O expansion for most microcontroller families via the I2C interface. The system controller can enable the I/Os as either inputs or...
Continue ReadingRenesas Develops RJ45 Ethernet Socket With Entire Ethernet Controller Embedded Into It
Renesas Electronics Corporation, a significant supplier of advanced semiconductor solutions, announced its latest industrial Ethernet module solution, the I-RJ45. It combines a single- or dual-port RJ45 connector and simplifies integration for industrial Ethernet by supporting various...
Continue Reading8 Channel Optically Isolated IO Board
Opto-Isolated I/O Board offers a compact & convenient way to interface industrial type inputs/outputs to your microcontroller boards, Signal transmission between circuits of different potentials and impedances etc. Specifications 4 opto-isolated inputs & 4 opto-isolated...
Continue ReadingDIY I2C LCD Display
sspence @ instructables.com shows how to interface a character LCD using I2C and only two IO pins. The typical parallel LCD used with an Arduino (16x2 or 20x4) has 16 pins. Only 6 I/O pins are required on the Arduino, but what if you could get that down to two I/O pins, and still...
Continue ReadingIO expander board
I/O Expander Board offers a convenient way to interface upto 16 I/O pins in your project using SPI/I2C bus. This kit uses the famous MCP23S17 IO chip from Microhip. Specifications Supply sourced through the interfacing Box Header connector The kit has 2 separate Box Header...
Continue Reading