4-in-1 sensor fusion processor reduces power, size, and cost
IC

4-in-1 sensor fusion processor reduces power, size, and cost

Synaptics has launched its FlexSense 4-in-1 sensor fusion processor that reduces system design, configuration, and costs in IoT applications. Synaptics Inc. has unveiled its FlexSense family of sensor processors that supports input from up to four sensors in a tiny form factor,...

Continue Reading
1.103
Views
0 Comments
NanoPi R2C Plus dual GbE Router Board Adds 8GB eMMC Flash
SBC

NanoPi R2C Plus dual GbE Router Board Adds 8GB eMMC Flash

NanoPi R2C Plus is an SBC (single-board computer) designed and developed by FriendlyElec. This new release can be used in several applications ranging from industrial usage to even personal use but is mainly used for IoT applications. The NanoPi R2C Plus is an open-source platform that...

Continue Reading
1.239
Views
0 Comments
Mixtile Edge 2 IoT edge device is a multipurpose computer with RK3568
SBC

Mixtile Edge 2 IoT edge device is a multipurpose computer with RK3568

We recently covered the release of Mixtile Blade 3 single-board computer, which is going to be launched in Crowdfunding, and comes equipped with Rockchip RK3588 SoC, runs a hybrid Android and Linux distribution. Chinese embedded device manufacturer Mixtile Limited has gone ahead and...

Continue Reading
1.206
Views
0 Comments
Linux Kernel driver support in development for NVIDIA Deep Learning Accelerator
AI

Linux Kernel driver support in development for NVIDIA Deep Learning Accelerator

In 2017, NVIDIA released the Deep Learning Accelerator (NVDLA), a free and open-source technology designed for embedded and IoT applications. Leveraging the scalability and configurability, NVDLA is integrated into the latest NVIDIA Jetson AGX Orin module that is priced at $1990. In the...

Continue Reading
1.134
Views
0 Comments
BIGTREETECH’s Raspberry Pad 5 Powered by Raspberry Pi CM4 is suitable for 3D Printers
Raspberry PiTop Stories

BIGTREETECH’s Raspberry Pad 5 Powered by Raspberry Pi CM4 is suitable for 3D Printers

Shenzhen-based 3D printing device manufacturer BIGTREETECH has released the Raspberry Pi Compute Module 4 powered breakout board with an onboard 5-inch IPS touch display screen– named Raspberry Pad 5. Specifically designed for FDM 3D printers, the 5-inch capacitive touchscreen display...

Continue Reading
1.275
Views
0 Comments
Challenging the Status Quo of Supercapacitors and Batteries by Finding the Unique Middle Ground
Power

Challenging the Status Quo of Supercapacitors and Batteries by Finding the Unique Middle Ground

Where are Supercapacitors Used? Supercapacitors are widely used to increase the efficiency of smart meters, UPS, passenger vehicles, wind turbines, AGVs, smart devices, etc. Supercapacitors play a major role in many devices we use or see every day, such as emergency lights, dashcams,...

Continue Reading
1.123
Views
0 Comments
Foundries.io and Arduino presents Pro Portenta X8 for Secure IoT Solutions
ArduinoIoTSBCTop Stories

Foundries.io and Arduino presents Pro Portenta X8 for Secure IoT Solutions

Foundries.io and Arduino announce their partnership to deliver secure, cloud-based embedded Linux IoT and Edge solutions for enterprise with the flagship Arduino Pro Portenta X8 system on module (SoM). Arduino Pro Portenta X8 is an SoM that combines a Linux-based PaaS with docker...

Continue Reading
1.179
Views
0 Comments
Cat M1 vs Cat 1 vs Cat 4: Connectivity for Telematics
Technology

Cat M1 vs Cat 1 vs Cat 4: Connectivity for Telematics

Through increased adoption of data-driven telematics use cases in vehicles, there has been a rising need for telematics edge hardware across a range of vehicles. Telematics and connected vehicle solutions help unlock value across a range of vehicle types: passenger cars, heavy duty...

Continue Reading
1.195
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives