RGB Led Driver Shield for Arduino Nano
ArduinoLed

RGB Led Driver Shield for Arduino Nano

This is my second project for LED Driver based on CAT4101 IC. The first project was for single White LED. This project has been designed to drive 3 channels of RGB LEDs with PWM signal which helps to create multi-color LED light. Arduino Nano is used to generate PWM signals for RGB LEDs...

Continue Reading
5.135
Views
0 Comments
PIXO Pixel – An ESP32 Based IoT RGB Display
IoTLed

PIXO Pixel – An ESP32 Based IoT RGB Display

PIXO Pixel uses an ESP32 to control a matrix of 256(16x16) RGB LEDs. It is an IoT device that can display information via Wifi and BLE. The PIXO Pixel is an open source RGB display that uses the very cool, APA102-2020 Addressable LED in a 16 x 16 array. These LEDs are very fast,...

Continue Reading
4.636
Views
0 Comments
The ezPixel is an Upcoming FPGA based WS2812B Controller Board
FPGALed

The ezPixel is an Upcoming FPGA based WS2812B Controller Board

FPGAs are field programmable gate arrays which basically means they are reconfigurable hardware chips. FPGAs have found applications in different industries and engineering fields from the defence, telecommunications to automotive and several others but little application in the...

Continue Reading
7.900
Views
0 Comments
Osram Develops LED Beam Array Smart Headlamps That Can Analyze Road And Traffic
Led

Osram Develops LED Beam Array Smart Headlamps That Can Analyze Road And Traffic

After over three years of research and field demos, a prototype of Osram’s EVIYOS smart, controllable, high resolution LED automotive headlamp was introduced at the International Symposium on Automotive Lighting earlier this year in Darmstadt, Germany. This smart LED headlamp is able...

Continue Reading
4.498
Views
0 Comments
LED driver simplifies dimming control
IC

LED driver simplifies dimming control

A dual-channel step-down LED driver, the LT3964 from Linear Technology packs 40 V, 1.6 A power switches and an I2C interface for dimming control. [via] Operating over an input voltage range of 4 V to 36 V, the driver integrates two independently controlled LED drivers that switch at...

Continue Reading
4.970
Views
0 Comments
Wi-Lamp, the Open Source Wi-Fi LED lamp
Led

Wi-Lamp, the Open Source Wi-Fi LED lamp

LucaBellan @ open-electronics.org discuss about a multi-function LED lamp that is always connected over WiFi. Since several years already, it is possible to find systems for home automation: irrigation, doors and windows, lighting, air conditioning and alarm systems, everything can be...

Continue Reading
4.179
Views
0 Comments
Contactless Controlled Automatic Wardrobe LED Light
Led

Contactless Controlled Automatic Wardrobe LED Light

Contact-less controlled automatic wardrobe light turns on the LED when you open the wardrobe door. Τhe project is based on Hall effect IC including LED driver and tiny magnet. Board doesn’t require any mechanical switch. When magnet is close to the board, LED is off, when you open...

Continue Reading
4.301
Views
0 Comments
36V, 2-ch, 1.6A synchronous buck LED driver has I²C dimming
IC

36V, 2-ch, 1.6A synchronous buck LED driver has I²C dimming

Under the “Power by Linear” branding it recently created for the product lines it acquired with its purchase of Linear Technology, Analog Devices has added the LT3964, a dual channel, 36V, high efficiency, synchronous, step-down LED driver with internal 40V, 1.6A power switches and...

Continue Reading
4.510
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives