Tag: Led
![Pixblasters Announces New Firmware Updates for Its MS1 Video LED Controller Pixblasters Announces New Firmware Updates for Its MS1 Video LED Controller](https://www.electronics-lab.com/wp-content/uploads/2021/10/1-1024x968.png)
Pixblasters Announces New Firmware Updates for Its MS1 Video LED Controller
Pixblasters™ has announced the release of new firmware updates for its Pixblasters MS1 Video LED Controller, which enables real-time control of extensive video LED displays built by addressable LED strips. The firmware updates bring new FPGA LED controllers (ver. 107) that are...
Continue Reading![Radio Remote Control LED Dimmer Using NRF24L01 – Arduino Compatible Radio Remote Control LED Dimmer Using NRF24L01 – Arduino Compatible](https://www.electronics-lab.com/wp-content/uploads/2021/10/001-1.jpg)
Radio Remote Control LED Dimmer Using NRF24L01 – Arduino Compatible
This is an easy-to-make LED dimmer using RF remote control. The project is capable of driving a load up to 24W (2A X 12V LED). Any 12V single or 12V LED strip can be used. This is an open-source Arduino compatible hardware that has Atmega328 microcontroller, Potentiometer, MOSFET, 5V...
Continue Reading![12W Constant-Current LED Driver with PWM Dimming – 12V DC@1A Input 12W Constant-Current LED Driver with PWM Dimming – 12V DC@1A Input](https://www.electronics-lab.com/wp-content/uploads/2021/09/003-5.jpg)
12W Constant-Current LED Driver with PWM Dimming – 12V DC@1A Input
This is a high-performance, adjustable constant current, and PWM dimmer project. It provides accurate output constant current and PWM control. The circuit regulates the current flowing through a LED/LED array to maintain the desired level of light output. The board consists of CAT4101...
Continue Reading![KLS Series Illuminated Pushbutton KLS Series Illuminated Pushbutton](https://www.electronics-lab.com/wp-content/uploads/2021/09/ck-components-kls-series-illuminated-pushbutton.webp)
KLS Series Illuminated Pushbutton
C&K's pushbutton switch has audible feedback and provides the status of the switches’ positioning C&K's KLS series pushbutton switch meets market requirements on haptic and sound with clear “click” sound feedback. It provides the status of the switches’ positioning...
Continue Reading![Small, high-brightness RGB LEDs boast improved color mixing Small, high-brightness RGB LEDs boast improved color mixing](https://www.electronics-lab.com/wp-content/uploads/2021/09/CL-V500定規_小-e1631022704534.jpg)
Small, high-brightness RGB LEDs boast improved color mixing
Upward-lighting multicolor LEDs in the CL-V501 Series from Citizen Electronics have improved color mixing, come in a small package, and exhibit high brightness. Multicolor LEDs have three dies of RGB (red, green and blue) in one package. This lets them generate various colors, including...
Continue Reading![Inolux IN-PI4818QAS5R5G5BPW is an RGBW LED with Integrated IC Inolux IN-PI4818QAS5R5G5BPW is an RGBW LED with Integrated IC](https://www.electronics-lab.com/wp-content/uploads/2021/09/Screenshot-2021-09-03-at-17-29-30-IN-PI4818QAS5R5G5BPW-RGBW-LED-with-Integrated-IC.png)
Inolux IN-PI4818QAS5R5G5BPW is an RGBW LED with Integrated IC
Inolux IN-PI4818QAS5R5G5BPW RGBW LED with Integrated Circuit (IC) is a side view SMD type LED that is available in 4.8mm x 1.8mm x 1.6mm dimensions. This LED offers a built-in IC with high precision of constant current and internal RGBW chips spectral processing in advance. The RGBW...
Continue Reading![Monolithic Power Systems (MPS) MP3362 Boost LED Driver Monolithic Power Systems (MPS) MP3362 Boost LED Driver](https://www.electronics-lab.com/wp-content/uploads/2021/08/Screenshot-2021-08-26-at-20-45-37-MP3362-Boost-LED-Driver.png)
Monolithic Power Systems (MPS) MP3362 Boost LED Driver
Monolithic Power Systems (MPS) MP3362 Boost LED Driver is a fixed-frequency converter for low-current and high-current boost applications. The driver features a low 0.2V feedback voltage for higher efficiency in white LED driver applications. The MP3362 regulates the output voltage...
Continue Reading![Controlling a LED with ESP32-C3-DevKITM-1 Development Board using ESP-IDF Controlling a LED with ESP32-C3-DevKITM-1 Development Board using ESP-IDF](https://www.electronics-lab.com/wp-content/uploads/2021/08/Blink-Folder-for-ESP32-C3-DevKITM-1-1024x665.png)
Controlling a LED with ESP32-C3-DevKITM-1 Development Board using ESP-IDF
In this article, we will explore another onboard functionality of Espressif’s ESP32-C3-DevKITM-1 which is the onboard RGB LED. With its powerful connectivity, compact size at such a low cost the ESP32-C3- DevKit M-1 board is a must-try for your next IoT project. You can read the...
Continue Reading