LILYGO T3 TCXO is A Low-Cost ESP32-Based Development Board with LoRa, Wi-Fi, BLE, and OLED Display for IoT and Wireless Applications
IoTMcuRF

LILYGO T3 TCXO is A Low-Cost ESP32-Based Development Board with LoRa, Wi-Fi, BLE, and OLED Display for IoT and Wireless Applications

LILYGO has recently introduced the T3 TCXO development board, based on the ESP32 supporting a frequency of 915MHz with 4MB of flash memory, offering wireless connectivity through Wi-Fi and Bluetooth V4.2+ BLE. The board includes several useful features like a reset and boot button,...

Continue Reading
1.080
Views
0 Comments
Elecrow Pi Terminal Review – An All-in-One 7-Inch Industrial Computer with Raspberry Pi CM4 Features LoRa, 4G, CAN Bus, Wi-Fi, BLE, and Dual GbE LAN
LCD/OLED/ePaperRaspberry PiSBC

Elecrow Pi Terminal Review – An All-in-One 7-Inch Industrial Computer with Raspberry Pi CM4 Features LoRa, 4G, CAN Bus, Wi-Fi, BLE, and Dual GbE LAN

Introduction Industrial-grade computers are evolving fast, and the Pi Terminal 7-inch Industrial Computer by Elecrow is a perfect example. It combines a 7-inch IPS display with the power of the Raspberry Pi Compute Module 4 (CM4). This compact yet feature-rich device is designed for...

Continue Reading
1.117
Views
0 Comments
Renesas RA8E1 and RA8E2 Microcontrollers Features High-Performance Arm Cortex-M85 for Automation and AIoT Applications
IoTMcu

Renesas RA8E1 and RA8E2 Microcontrollers Features High-Performance Arm Cortex-M85 for Automation and AIoT Applications

Renesas Electronics has introduced the RA8E1 and RA8E2 microcontrollers (MCUs) groups, part of the RA8 Series, which utilize the Arm Cortex-M85 core with Helium and TrustZone technology. These MCUs deliver exceptional performance of up to 6.39 CoreMark/MHz and leverage Arm Helium for a...

Continue Reading
1.042
Views
0 Comments
u-blox X20 all-band GNSS module Supports Multi-Band Signals for High-Precision Positioning
GPSTop Stories

u-blox X20 all-band GNSS module Supports Multi-Band Signals for High-Precision Positioning

u-blox has recently released the X20 all-band GNSS module designed to provide centimeter-level accuracy in a global market. The module includes a multi-band GNSS receiver along with an L-band receiver which receives signals from L1, L2, L5, and the new L6/E6 bands. The module also...

Continue Reading
1.121
Views
0 Comments
XIAO ESP32S3 with Wio-SX1262 LoRa Module Support for Meshtastic and IoT Applications
IoT

XIAO ESP32S3 with Wio-SX1262 LoRa Module Support for Meshtastic and IoT Applications

Seeed Studio has recently released the XIAO ESP32S3 for Meshtastic and LoRa development kit that integrates the XIAO ESP32S3 board with the compact Wio-SX1262 LoRa module, connected via a board-to-board interface for seamless operation. The dual-core Xtensa ESP32S3 processor powers the...

Continue Reading
1.121
Views
1 Comments
Synaptics SYN4383 and SYN43756(E) Tri-Band SoCs are Designed for IoT Devices, Automotive, and Industrial Applications
IoTSoC-SiP

Synaptics SYN4383 and SYN43756(E) Tri-Band SoCs are Designed for IoT Devices, Automotive, and Industrial Applications

Synaptics has finally revealed the SYN4383 and the SYN43756(E) high-performance, compact tri-band SoCs, that integrate Wi-Fi, Bluetooth, and IEEE 802.15.4 radios to optimize wireless connectivity for IoT devices. Both chips support Wi-Fi 6/6E with 2x2 MIMO antenna configurations,...

Continue Reading
1.083
Views
0 Comments
LumenRadio W-Modbus Offers Cable-Free Modbus RTU System for Building Automation
McuProducts

LumenRadio W-Modbus Offers Cable-Free Modbus RTU System for Building Automation

LumenRadio has recently launched the W-Modbus solution, which offers a wireless Modbus RTU system, designed to replace traditional Modbus RTU cables. It is based on Nordic’s nRF52840 SoC, connects up to 100 nodes, includes a 100mW power amplifier, and supports Bluetooth LE for...

Continue Reading
1.083
Views
0 Comments
NXP RW612: A Tri-Radio Wireless MCU Integrates Wi-Fi 6, Bluetooth 5.4, and 802.15.4 for Smart Home and Industrial Automation
Mcu

NXP RW612: A Tri-Radio Wireless MCU Integrates Wi-Fi 6, Bluetooth 5.4, and 802.15.4 for Smart Home and Industrial Automation

The NXP has recently introduced RW612, a tri-radio wireless MCU integrating Wi-Fi 6, Bluetooth Low Energy (LE) 5.4, and 802.15.4 radios. Powered by a 260 MHz Arm Cortex-M33 core with TrustZone-M, it includes 1.2 MB of SRAM and a high-bandwidth Quad SPI interface with secure decryption...

Continue Reading
1.082
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives