Tag: optoisolator
![Isolated Digital ON/OFF Switch for AC load Isolated Digital ON/OFF Switch for AC load](https://www.electronics-lab.com/wp-content/uploads/2016/02/AC_Load_Switch_M011-e1456318577373.jpg)
Isolated Digital ON/OFF Switch for AC load
ON/OFF AC load Controller project offers simple On/Off Switch Control with two tact switch. Specifications Input supply – 12 VDC @ 40 mA Output – upto 500 W – 230 VAC Onboard tactile switch for ON/OFF control Opto-isolated Triac based design Power-On LED...
Continue Reading![DC Output Solid State Relay DC Output Solid State Relay](https://www.electronics-lab.com/wp-content/uploads/2016/01/DC_Solid_State_Relay_I052A.jpg)
DC Output Solid State Relay
DC Output Solid State Relay 10Amps 60V DC (Optically Isolated Input) This project has been designed around TLP250/352 which is Opto-Coupler IGBT/MOSFET Gate Driver from Toshiba and Mosfet IRFP260 from IR, This relay consists of optically isolated gate driver and low impedance...
Continue Reading![4 Channel Triac Board 4 Channel Triac Board](https://www.electronics-lab.com/wp-content/uploads/2015/09/4-CHANNEL-TRAIC-BOARD-PIC011.jpg)
4 Channel Triac Board
Opto-Isolated 4-Channel Triac Board (R) is used for fast switching applications. Ideal for switching mains circuits, lights, appliances and small load. Each circuit is effectively isolated with opto-isolators on each channel, TTL inputs control each channel. Trigger input 2-12...
Continue Reading![8T49N004 Programmable Femtoclock® NG with 4-outputs 8T49N004 Programmable Femtoclock® NG with 4-outputs](https://www.electronics-lab.com/wp-content/uploads/2015/08/femptoclock.png)
8T49N004 Programmable Femtoclock® NG with 4-outputs
This design features a fourth generation programmable femtoclock that provides reference frequencies to replace crystals and SAW oscillators in high-performance applications. It is programmable through I2C interface. It has four selectable LVPECL or LVDS via I2C while its FemtoClock...
Continue Reading