48V/12V DC/DC for automotive dual-rails offers bidirectional power flows
IC

48V/12V DC/DC for automotive dual-rails offers bidirectional power flows

LTC3871 is a 100V/30V bidirectional two phase synchronous buck or boost controller, for 48V/12V automotive dual battery systems; it provides bidirectional DC/DC control and battery charging between the 12V and 48V boardnets, operating in buck mode from the 48V bus to the 12V bus or in...

Continue Reading
4.625
Views
0 Comments
100Vin, 5W out regulator uses primary-side control
IC

100Vin, 5W out regulator uses primary-side control

LT8303 is a monolithic flyback regulator in a TSOT-23 package that simplifies the design of isolated DC/DC converters. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no opto-isolator, LT1431 or third winding for regulation....

Continue Reading
3.496
Views
0 Comments
Intersil’s Switching Regulators Adopted in Huawei P9 Smartphone
IC

Intersil’s Switching Regulators Adopted in Huawei P9 Smartphone

Intersil announces the adoption of its latest family of buck-boost switching regulators in one of Huawei's newest smartphone. The ISL91110 buck-boost switching regulator powers the Huawei P9 smartphone's key system peripherals providing excellent efficiency and performance....

Continue Reading
3.705
Views
0 Comments
ISL91128 – A New Buck-Boost Regulator With I2C Interface From Intersil
ICPartsPower

ISL91128 – A New Buck-Boost Regulator With I2C Interface From Intersil

If your application requires a changing supply voltage, then this new IC is ideal for you. Intersil announced the ISL91128, a new buck-boost regulator. The new regulator has an I2C interface to select a broad set of features including output voltage range and slew rate. This eliminates...

Continue Reading
7.031
Views
0 Comments
Power supply IC packs eight buck regulators
IC

Power supply IC packs eight buck regulators

Aimed at systems requiring multiple low-voltage supplies, Linear Technology’s LTC3374A can be configured to supply two to eight independent regulated outputs with 15 possible output-current configurations. Each of the eight synchronous 1-A buck converters is powered from an...

Continue Reading
4.427
Views
0 Comments
Rail-to-rail step-down regulator sinks/sources ±5A from 0V to 14.5VOUT
IC

Rail-to-rail step-down regulator sinks/sources ±5A from 0V to 14.5VOUT

LTC3623 is a ±5A high efficiency, current mode synchronous buck regulator that is adjustable from 14.5V down to 0V output with a single resistor. Its architecture uses a 50 µA current reference, combined with a single resistor, to set the output voltage. by Graham Prophet @...

Continue Reading
4.745
Views
0 Comments
LTM8003 – 40VIN, 3.5A Step-Down μModule Regulator
IC

LTM8003 – 40VIN, 3.5A Step-Down μModule Regulator

LTM8003 is a step-down DC/DC µModule (micro-module) regulator with a 40V input voltage rating (42V abs. Max.) and 3.5A of continuous (6A peak) output current. The LTM8003’s pinout is FMEA (failure mode effects analysis) compliant, so the output voltage stays at or below the...

Continue Reading
5.250
Views
0 Comments
LTM8053 – 40VIN, 3.5A/6A Step-Down μModule Regulator
IC

LTM8053 – 40VIN, 3.5A/6A Step-Down μModule Regulator

The LTM8053 is a 40VIN, 3.5A (continuous) step-down μModule regulator. Included in the package are the switching controller, power switches, inductor, and all support components. Operating over an input voltage range of 3.4V to 40V, the LTM8053 supports an output voltage range of...

Continue Reading
5.155
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives