Tag: SMT
![New Convection Reflow Oven for Soldering with 6 Heating Zones New Convection Reflow Oven for Soldering with 6 Heating Zones](https://www.electronics-lab.com/wp-content/uploads/2019/09/in6-img-2-e1567603825880.png)
New Convection Reflow Oven for Soldering with 6 Heating Zones
Neoden USA, a distributor of Neoden products in the US, is pleased to announce the launch of their new desktop reflow oven, Neoden IN6. The reflow oven is equipped with 6 heating zones, 3 of them are located at the top and the other 3 are located at the bottom. The multiple zones will...
Continue Reading![Low profile target connectors, 2.21mm above the board Low profile target connectors, 2.21mm above the board](https://www.electronics-lab.com/wp-content/uploads/2017/03/2017-03-03-eete-jh-max.png)
Low profile target connectors, 2.21mm above the board
Mill-Max has released its lowest profile target connectors to date with an above board height of only 2.21mm. Target connectors are used in place of SMT pads on a PCB as the mating surface for spring-loaded pins. Low profile target connectors, 2.21mm above the board -...
Continue Reading![1″ 100W Hot-Plate for SMT Reflow 1″ 100W Hot-Plate for SMT Reflow](https://www.electronics-lab.com/wp-content/uploads/2016/03/hot-plate.png)
1″ 100W Hot-Plate for SMT Reflow
This is a small hot-plate for SMT reflow soldering build upon an Arduino Pro and controlled using PWM and high side power MOSFETs. Black Mesa Labs has been using a $20 hot plate for a year now for soldering QFN ICs to PCBs. Only issue so far has been the size ( 10″x10″x3″ ) and...
Continue Reading![Arduino Motorized SMT Solder Paste Dispenser Arduino Motorized SMT Solder Paste Dispenser](https://www.electronics-lab.com/wp-content/uploads/2015/11/IMG_20151107_143235_preview_featured.jpg)
Arduino Motorized SMT Solder Paste Dispenser
by zapta @ thingiverse.com: This is a motorized solder paste dispenser for soldering SMT boards. The home directory of this project is on github here https://github.com/zapta/misc/tree/master/paste_injector and it include hardware and firmware design of a compatible controller board...
Continue Reading![Surface-mount device prototyping in education Surface-mount device prototyping in education](https://www.electronics-lab.com/wp-content/uploads/2015/09/smd_parts-1024x655.png)
Surface-mount device prototyping in education
In this article Vassilis K. Papanikolaou explains how SMD prototyping practice can be used in learning environments using simple and wide available tools and equipment: A feasibility study is herein attempted, towards the adaptation of modern surface-mount device (SMD) prototyping...
Continue Reading