2.7V-4.2V input to 3.3V output Buck-Boost Converter
Power supply

2.7V-4.2V input to 3.3V output Buck-Boost Converter

This project shows a DC-DC buck boost circuit which can produce an output of 3.3V for an input of 2.7V to 4.2V , for example from a Li-on battery. The Circuit uses LTC3440 Buck boost IC which is a fixed frequency boost converter. To get high efficient results, inductor with high...

Continue Reading
6.580
Views
0 Comments
LT8390 – 60V Synchronous 4-Switch Buck-Boost Controller with Spread Spectrum
IC

LT8390 – 60V Synchronous 4-Switch Buck-Boost Controller with Spread Spectrum

The LT8390, is a synchronous buck-boost DC/DC controller that can regulate output voltage, and input or output current from input voltages above, below and equal to the output voltage. Its 4V to 60V input voltage range and 0V to 60V output voltage range are ideal for voltage...

Continue Reading
6.748
Views
0 Comments
LTC3786 – Efficient boost controller takes the heat
IC

LTC3786 – Efficient boost controller takes the heat

Linear Technology has launched a higher-temperature 150°C version of its LTC3786 step-up DC/DC controller that boasts 98% efficiency. This H-grade device replaces the boost diode with an N-channel MOSFET for higher efficiency and reduced power loss. by Susan Nordyk @ edn.com: The...

Continue Reading
3.994
Views
0 Comments
$14.5 All-Purpose Switched-Mode Power Supply
Power supplyUSB

$14.5 All-Purpose Switched-Mode Power Supply

Switching technology devices and integrated circuits are growing fast providing solutions that obtain power for different kind of circuits and devices, and they are proposed in different variations. A useful little known kind which is suitable for mixed supply systems is called...

Continue Reading
6.106
Views
0 Comments
Dual input, 2.5A step-down DC/DC achieves 95% efficiency
IC

Dual input, 2.5A step-down DC/DC achieves 95% efficiency

by Graham Prophet @ edn.com: LTC3126 is a 2.5A, 2.4V to 42V input, synchronous step-down switching regulator with integrated dual input PowerPath control. Its power stage topology enables operation from either of two independent power sources, with seamless, internally controlled...

Continue Reading
3.902
Views
0 Comments
LTC3623 – Switching regulator doubles as Class-D audio amplifier
Audio

LTC3623 – Switching regulator doubles as Class-D audio amplifier

Clemens Valens @ elektormagazine.com discuss about LTC3623 switching regulator which can be used as Class-D Audio Amplifier. Sure thing, Elektor has published several designs of adjustable power supplies based on switching regulators, so we know that doing this properly in a...

Continue Reading
5.896
Views
0 Comments
48V/12V DC/DC for automotive dual-rails offers bidirectional power flows
IC

48V/12V DC/DC for automotive dual-rails offers bidirectional power flows

LTC3871 is a 100V/30V bidirectional two phase synchronous buck or boost controller, for 48V/12V automotive dual battery systems; it provides bidirectional DC/DC control and battery charging between the 12V and 48V boardnets, operating in buck mode from the 48V bus to the 12V bus or in...

Continue Reading
4.625
Views
0 Comments
LTC7851 – Quad Output, Multiphase Step-Down Voltage Mode DC/DC Controller with Accurate Current Sharing
IC

LTC7851 – Quad Output, Multiphase Step-Down Voltage Mode DC/DC Controller with Accurate Current Sharing

The LTC7851 is a quad output multiphase synchronous step-down DC/DC controller with accurate current sharing between phases and differential output voltage sensing. This controller works in conjunction with external power train devices such as DrMOS and power blocks as well as...

Continue Reading
4.224
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives