Tag: Touch
RP2040-Touch-LCD-1.69: Featuring RP2040, QMI8658 6-Axis Sensor, and ETA6096 Li-Ion Recharge Circuit
Waveshare's RP2040-Touch-LCD-1.69 is a compact MCU board built around Raspberry Pi's RP2040 microcontroller. It features a dual-core Arm Cortex M0+ processor running up to 133 MHz, with 264KB of SRAM and 16MB of Flash memory. The board includes a 1.69-inch capacitive touch display, a...
Continue ReadingWaveshare ESP32-S3-Touch-LCD-4.3B: Featuring Xtensa LX7 Dual-Core Processor and ESP32-S3 SoC
The Waveshare ESP32-S3-Touch-LCD-4.3B is a flexible development board built on the ESP32-S3 SoC with RS485, CAN Bus, I2C, and isolated DIO interfaces via terminal block. It has a 4.3-inch capacitive touchscreen with a resolution of 800×480. The board includes a 32-bit dual-core Xtensa...
Continue ReadingSB Components launches a 1.28-inch touch LCD HAT for your Raspberry Pi
UK-based embedded device manufacturer, SB Components, has launched a crowdfunding campaign for a 1.28-inch touch LCD HAT with a goal of £3,000. The Kickstarter product page gives us more details on the 1.28-inch display, which has been over-subscribed to reach £3,522 (as of writing)....
Continue ReadingAzoteq IQS227D Capacitive Proximity & Touch Controller
Azoteq IQS227D Single-Channel Capacitive Proximity and Touch Controllers are fully integrated self-capacitive sensors with dual outputs (touch and proximity outputs). Azoteq IQS227D is sub-5μA in low-power mode while sensing proximity and offers advanced on-chip digital signal...
Continue ReadingSingle Key Touch Sensor using LM2907
This is a single key device featuring a touch ON (Momentary) output. The project is built using the LM2907 chip. The board provides stable sensing and has a wide working power supply range 5V to 12V DC and consumes 20mA. D1 power LED, D2 function LED. Touch sensors are used in many...
Continue Reading3 Channel Capacitive Touch Sensor with I2C
The project described here is a 3 channel capacitive touch sensor based on CAP1203 chip from Microchip which is a multiple-channel capacitive touch sensor controller. It has 3 x individual capacitive touch sensor inputs with programmable sensitivity for use in touch sensor applications....
Continue ReadingWhoa Board: Dream With Touch Sensing EL Wire, Panels, Paint
The Whoa Board makes things glow. It also makes glow-y things sense touch. It's an open prototyping platform for wearable electronics! Turn any EL (Electro-Luminescient) material into a touch sensor with no additional hardware. It's an open prototyping platform for wearable...
Continue ReadingTouchscreen Arduino Library for XPT2046 Touch Controller Chip
XPT2046_Touchscreen is a library for the XPT2046 resistive touchscreen controllers used on many low cost TFT displays. Touchscreen Arduino Library for XPT2046 Touch Controller Chip -...
Continue Reading