Tag: µModule
LTM8045 – Inverting or SEPIC μModule (Power Module) DC/DC Converter with Up to 700mA Output Current
The LTM8045 from Analog Devices is a DC to DC Converter with Input Voltage 2.8 to 18.0 V, Output Voltage 1 2.5 to 15.0 V, Output Current 1 700 to 375 mA, Output Voltage 2 -15.0 to -2.5 V, Output Current 2 375 to 700 mA. Tags: Surface Mount, Buck/Step down. More details for LTM8045 can...
Continue ReadingLTM4681 – Quad 31.25A or Single 125A μModule Regulator with Digital Power System Management
Analog Devices Inc. LTM4681 μModule® DC/DC Regulator features remote configurability and telemetry monitoring of power management parameters over PMBus. The LTM4681 is comprised of digitally programmable analog control loops, precision mixed-signal circuitry, EEPROM, power MOSFETs,...
Continue ReadingAnalog Devices Introduces Quad-Output DC/DC µModule Regulators
Analog Devices, Inc., has introduced the LTM4668 and LTM4668A µModule® regulators, quad-output DC/DC regulators with up to 4.8A output capability. The new devices integrate switching controllers, power FETs, inductors and support components, easing the design process while reducing...
Continue Reading50A µModule regulator scalable to 250A runs cool with inductors exposed as heatsinks
Analog Devices announces the Power by Linear LTM4678 dual 25A or single 50A step-down µModule regulator with PMBus digital interface. By stacking and exposing its two inductors on top of BGA package, the LTM4678 uses the inductors as heat sinks to transfer heat from inside, keeping the...
Continue ReadingAnalog Devices’ tiny µModule boost regulator for low voltage optical systems
Analog Devices, Inc. has announced the Power by Linear LTM4661, a low power step-up µModule regulator in a 6.25mm x 6.25mm x 2.42mm BGA package. Only a few capacitors and one resistor are required to complete the design, and the solution occupies less than 1cm²single-sided or...
Continue ReadingDual 15A or Single 30A µModule Regulator with Stacked Inductor Package is 96% Peak Efficient
Analog Devices announces the Power by Linear LTM4662, a dual 15A or single 30A step-down µModule regulator in a BGA package with an exposed stacked inductor for improved thermal dissipation properties. The remaining components, the MOSFETs, DC/DC controller and supporting...
Continue ReadingLTM4643 – Ultrathin Quad μModule Regulator with Configurable 3A Output Array
Configurable as quad, triple, dual or single output, the LTM4643 quad output step-down µModule [micromodule] (power module) regulator deliver, respectively, 12A, 6A & 6A or 9A & 3A, or 4 x 3A from a 9 x 15 x 1.82 mm ultrathin LGA package. by Graham Prophet @ edn.com: This...
Continue ReadingLTM8003 – 40VIN, 3.5A Step-Down μModule Regulator
LTM8003 is a step-down DC/DC µModule (micro-module) regulator with a 40V input voltage rating (42V abs. Max.) and 3.5A of continuous (6A peak) output current. The LTM8003’s pinout is FMEA (failure mode effects analysis) compliant, so the output voltage stays at or below the...
Continue Reading