login
This is the image preview of the following page:
Troubleshooting a 32kHz Crystal Oscillator
How to Actually Make it Oscillate? Now for an oscillator to work, we need an amplifier with a gain of greater than 1, and a phase shift of 360 degrees to get positive feedback. First problem – the transistor was saturated, with Vc stuck near 0V. For an oscillator to start noise gets amplifie... Read More
Image Downloads:
- full (600x287)
- thumbnail (150x150)
- medium (300x144)
- medium_large (600x287)
- large (600x287)
- 1536x1536 (600x287)
- 2048x2048 (600x287)
- re_large (600x287)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x287)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x236)
- menu-24x24 (24x11)
- menu-36x36 (36x17)
- menu-48x48 (48x23)
- sendpress-max (600x287)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x287)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x72)
RELATED POSTS
24 May, 2019 MicroSys Electronics New module and SBC Features NXP’s Cortex-A72 based LS1028A
29 August, 2018 Tutorial, Experiment & Teardown of a 24GHz Doppler Radar Module
25 October, 2017 Bosch BME280 sensor combines pressure, humidity and temperature measurement
4 June, 2022 MistySOM is a System on Module that provides High Performance with Low Power
25 July, 2019 Benefits of Multilayer PCB and Applications
29 May, 2022 BrainChip and Edge Impulse collaborate for better edge AI product offerings
