login
This is the image preview of the following page:
ZeroPhone - a Raspberry Pi smartphone
Arsenijs build a Pi-powered open-source mobile phone (that you can assemble for 50$ in parts). Currently, it costs about 50$ in parts, and all the parts are available on eBay. No BGA or other difficultly solderable ICs are used (with the obvious exception of Pi Zero). User interface is written ... Read More
Image Downloads:
- full (935x704)
- thumbnail (150x150)
- medium (850x640)
- medium_large (640x482)
- large (640x482)
- 1536x1536 (935x704)
- 2048x2048 (935x704)
- re_large (783x600)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x236)
- menu-24x24 (24x18)
- menu-36x36 (36x27)
- menu-48x48 (48x36)
- sendpress-max (600x452)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x452)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x113)
RELATED POSTS
21 January, 2021 The VCNL36825T integrates a proximity sensor (PS), and a VCSEL into one small package
11 October, 2017 Raspberry Pi NAS Tutorial
4 April, 2023 iWave’s most anticipated 64-bit Arm-A55 and RISC-V MPU-based System on Module is launched at EW23
2 November, 2015 500mA, 140V Boost/SEPIC/Flyback/Inverting DC/DC Converter with IQ= 6uA
23 September, 2021 SparkFun’s Qwiic Tsunami Super WAV Trigger
8 April, 2021 Low Voltage Lead Acid Battery Disconnect board – Prevents Deep Discharge Of 12V Lead Acid Battery
